Home » PDF Ebook » pdf Ebook Signal Mirror Installation Instructions

pdf Ebook Signal Mirror Installation Instructions

[ Thursday, December 30th, 2010 | by automotiveroom | under PDF Ebook ]

Signal Mirror Installation Instructions pdf Ebook Signal Mirror Installation Instructions

INCLUDED ITEMS:
1 left and 1 right Signal® mirror
1 left and 1 right wire harness
4 foam pads w/single side adhesive
4 blue T-taps
4 blue spade terminals
1 instruction manual
8 cable ties (Not Required)
1 dielectric grease (Not Required)
REQUIRED TOOLS:
Ratchet with extension or ratcheting screwdriver
8mm socket
10mm socket
Small slotted screwdriver
Medium Philips screwdriver
Small pry bar
Needle nose pliers
Wire crimper and stripper
Masking tape
Multimeter
Sturdy gloves
Safety glasses or goggles

1. Start with the driver’s side door and lower the window. (A)
2. Use a small slotted screwdriver to remove the plastic screw cover
located on the inside section of the door. (B)
3. Remove the screw behind the screw cover and the screw located
directly below the corner speaker. (C)
7. Starting from the left side, use a small slotted
screwdriver to pry open the cover above the door
handle. Remove the screw behind the cover. (A)
8. The cover around the door handle needs to be
removed. There are two snaps at the top and bottom
of the cover that hold it in place. Start at the top and
slide a small slotted screwdriver in between the door
lock lever and cover. While pulling back on the
cover, gently pry down on the screwdriver to release
the snap from the tab. When repeating this process
on the bottom of the cover, pry up instead of down.
(B) & (C)……………………………

Download Free Ebook pdf Ebook Signal Mirror Installation Instructions